Knitted wire over elastomer

If a high elasticity of the gasket is required, knitted wires over are used.

The core (e.g. solid or foamed silicone or foamed neoprene) is usually knitted with two layers of metal wire. The following wire types are available: , FCS, and .

If it is necessary to use a very soft seal, the use of PU foam is recommended.

  • High elasticity of the gasket
  • Standard two-layers knitted
  • For particularly soft gaskets, the use of PU foam with single layer coating is recommended
  • Solid silicone, foamed silicone and foamed neoprene available as

More details about knitted wire gaskets

The tolerances for our knitted wire gaskets can be found here

WERS series Round profile

Dimensions
Article number Measure A (in mm) Data sheet
WERS-1,6-XXX-YY 1,6
WERS-2,4-XXX-YY 2,4
WERS-3,2-XXX-YY 3,2
WERS-4,8-XXX-YY 4,8
WERS-6,4-XXX-YY 6,4
WERS-8-XXX-YY 8,0
WERS-9,5-XXX-YY 9,5
WERS-12,7-XXX-YY 12,7

Other dimensions on request.

WERH series Tubular round profile

Dimensions
Article number Measure A (in mm) Measure B (in mm) Data sheet
WERH-1,6-XXX-YY 1,6 0,5
WERH-2,4-XXX-YY 2,4 0,8
WERH-3,2-XXX-YY 3,2 1,6
WERH-4,8-XXX-YY 4,8 2,4
WERH-6,4-XXX-YY 6,4 3,0
WERH-8,0-XXX-YY 8,0 6,0
WERH-9,5-XXX-YY 9,5 6,0
WERH-12,7-XXX-YY 12,7 9,5

Other dimensions on request.

WERE series Rectangular profile

Dimensions
Article number Measure A (in mm) Measure B (in mm) Data sheet
WERE-3,2x3,2-XXX-YY 3,2 3,2
WERE-4,8x3,2-XXX-YY 4,8 3,2
WERE-6,4x3,2-XXX-YY 6,4 3,2
WERE-9,5x3,2-XXX-YY 9,5 3,2
WERE-12,7x3,2-XXX-YY 12,7 3,2
WERE-4,8x4,8-XXX-YY 4,8 4,8
WERE-6,4x4,8-XXX-YY 6,4 4,8
WERE-9,5x4,8-XXX-YY 9,5 4,8
WERE-12,7x4,8-XXX-YY 12,7 4,8
WERE-6,4x6,4-XXX-YY 6,4 6,4
WERE-9,5x6,4-XXX-YY 9,5 6,4
WERE-12,7x6,4-XXX-YY 12,7 6,4
WERE-9,5x9,5-XXX-YY 9,5 9,5
WERE-12,7x9,5-XXX-YY 12,7 9,5
WERE-12,7x12,7-XXX-YY 12,7 12,7

Other dimensions on request.

WEDS series Double round core with fin

Dimensions
Article number Measure A (in mm) Measure B (in mm) Data sheet
WEDS-12,7x3,2-XXX-YY 12,7 3,2
WEDS-19,1x3,2-XXX-YY 19,1 3,2
WEDS-25,4x3,2-XXX-YY 25,4 3,2
WEDS-19,1x4,8-XXX-YY 19,1 4,8
WEDS-25,4x4,8-XXX-YY 25,4 4,8
WEDS-19,1x6,4-XXX-YY 19,1 6,4
WEDS-25,4x6,4-XXX-YY 25,4 6,4

Other dimensions on request.

WERF series Round core with fin

Dimensions
Article number Measure A (in mm) Measure B (in mm) Data sheet
WERF-9,6x3,2-XXX-YY 9,6 3,2
WERF-12,7x3,2-XXX-YY 12,7 3,2
WERF-15,9x3,2-XXX-YY 15,9 3,2
WERF-14,3x4,8-XXX-YY 14,3 4,8
WERF-17,5x4,8-XXX-YY 17,5 4,8
WERF-20,7x4,8-XXX-YY 20,7 4,8
WERF-15,9x6,4-XXX-YY 15,9 6,4
WERF-19,1x6,4-XXX-YY 19,1 6,4
WERF-22,3x6,4-XXX-YY 22,3 6,4
WERF-17,5x8,0-XXX-YY 17,5 8,0
WERF-20,7x8,0-XXX-YY 20,7 8,0
WERF-23,9x8,0-XXX-YY 23,9 8,0
WERF-22,2x9,5-XXX-YY 22,2 9,5
WERF-25,4x9,5-XXX-YY 25,4 9,5
WERF-25,4x12,7-XXX-YY 25,4 12,7

Other dimensions on request.

Replace XXX in the item number by the desired metal wires:

  • MO =
  • VA =
  • AL = Aluminum
  • FCS = Tin plated copper clad steel

Replace YY by the desired elastomer:

  • NE = Foamed neoprene
  • SF = Solid silicone
  • SG = Foamed silicone
  • EP = Foamed

All sizes listed are that of the elastomer core. Allowances must be made for the wire mesh:

  • 1 layer:
    + app. 0,4 mm

  • 2 layers:
    + app. 0,8 mm
 
Give us a call:
+49 [0] 90 71 - 79 45 - 0
 
Contact us:
info@mtc.de
 
Downloads